We strive to provide our customers with the most dependable and accurate Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for our products.

This data was generated on actual 3D printed ISO specimen and tested by our resin company partners. We believe that the best use of this data is to assist our customers in comparing between grades of 3DXTECH materials so they can choose which may be the most appropriate for a given application.

TDS = Technical Data Sheet

SDS = Safety Data Sheet

Disclaimer: Technical data generated on 3D printed specimen are highly dependent upon the printer and the print settings applied. This data was created using 3D printed ISO specimen and is offered as reference only and is not intended to substitute end-use testing that may be required to determine fitness for any specific use.

Recommended Printing Experience

Novice:  A beginner using an entry-level 3D printer should have minimal problems using this material.

Intermediate:  User has several months of experience with a moderate to high quality printer.

Advanced:  User has > 1 year of printing experience and is using a high quality commercial printer.

Expert:  User has significant amount of experience and is using a high-performance or heavily modified printer These categories are somewhat arbitrary, but come from many years of our own printing experience as well as troubleshooting with customers. 

 

REACH/RoHS Documentation
MATERIAL  TDS SDS PRINTING DIFFICULTY LEVEL*
3DXSTAT™ ESD PEKK EXPERT
3DXSTAT™ ESD Ultem 9085 EXPERT
3DXSTAT™ ESD Ultem 1010 EXPERT
3DXSTAT™ ESD PPS ADVANCED
3DXSTAT™ ESD PVDF ADVANCED
3DXSTAT™ ESD PC ADVANCED
3DXSTAT™ ESD PETG NOVICE
3DXSTAT™ ESD ABS INTERMEDIATE
3DXSTAT™ ESD PLA NOVICE
CarbonX™ Carbon Fiber PEKK EXPERT
CarbonX™ Carbon Fiber PEKK-A [AERO] N/A EXPERT
CarbonX™ Carbon Fiber PEEK10 EXPERT
CarbonX™ Carbon Fiber PEEK20 EXPERT
CarbonX™ Carbon Fiber PEI 1010 EXPERT
CarbonX™ Carbon Fiber PEI 9085 EXPERT
CarbonX™ Carbon Fiber PC ADVANCED
CarbonX™ Carbon Fiber ezPC INTERMEDIATE
CarbonX™ Carbon Fiber PP N/A ADVANCED
CarbonX™ Carbon Fiber PA6 Gen3 INTERMEDIATE
CarbonX™ Carbon Fiber PC-ABS N/A INTERMEDIATE
CarbonX™ Carbon Fiber HT NYLON INTERMEDIATE
CarbonX™ Carbon Fiber PA12 Nylon INTERMEDIATE
Obsidian™ PA6+CF [Markforged ONYX Alternative] INTERMEDIATE
CarbonX™ Carbon Fiber PETG NOVICE
CarbonX™ Carbon Fiber ASA INTERMEDIATE
CarbonX™ Carbon Fiber ABS INTERMEDIATE
CarbonX™ Carbon Fiber PLA NOVICE
THERMAX™ PEKK-C EXPERT
THERMAX™ PEKK-A EXPERT
THERMAX™ PEEK EXPERT
THERMAX™ TPI [EXTEM]  EXPERT
THERMAX™ PEI [1010] EXPERT
THERMAX™ PEI [9085] EXPERT
THERMAX™ PPSU N/A EXPERT
THERMAX™ PSU EXPERT
THERMAX™ PPS ADVANCED
THERMAX™ PPE-PS N/A ADVANCED
SimuBone™ Bone Modeling Filament INTERMEDIATE
FluorX™ PVDF ADVANCED
Evolv3D™ OBC N/A ADVANCED
HyperLite™ PP N/A ADVANCED
3DXSTAT™ ESD-Flex TPU (90A) ADVANCED
3DXMAX® PC ADVANCED
ezPC™ INTERMEDIATE
3DXMAX® PC/ASA INTERMEDIATE
3DXMAX® PC/ABS INTERMEDIATE
3DXPro™ Low Gloss PETG INTERMEDIATE
MAX-G™ PETG NOVICE
ECOMAX® PLA NOVICE
ECOMAX® Tough PLA N/A NOVICE
3DXMAX® ASA INTERMEDIATE
Firewire® Flame Retardant ABS INTERMEDIATE
Firewire® Flame Retardant PC-ABS INTERMEDIATE
3DXMAX® ABS Filament N/A INTERMEDIATE
3DXMAX® HIPS Filament NOVICE
 FibreX™ PEEK-GF20 N/A EXPERT
 FibreX™ PEI-GF30 N/A EXPERT
 FibreX™ PA6-GF30 Nylon INTERMEDIATE
 FibreX™ PA12-GF30 Nylon INTERMEDIATE
 FibreX™ ABS-GF N/A INTERMEDIATE
 FibreX™ PP+GF30 N/A INTERMEDIATE
AmideX™ Nylon 6-66 INTERMEDIATE
WearX™ Wear Resistant PA6 INTERMEDIATE
AquaTek™ X1 USM Water Soluble Support N/A N/A
THERMAX™ HTS High Temp Support N/A N/A
3DXSTAT ESD-Nylon 12 N/A N/A
THERMAX™ MTS Medium Temp Support N/A N/A