CeramiX PEKK

SKU: PKK09UN100500NAT0

Regular price
$450.00
Sale price
$450.00
Regular price
$0.00

Benefits of CeramiX PEKK

  • Ease of printing
  • High stiffness and strength
  • Low thermal expansion below 150°C
  • Easily machinable post-printing
  • Excellent thermal properties (high Tg, HDT, Tm)
  • Low moisture absorption
  • Hard surface (100 Rockwell M)
  • This material was NOT formulated for applications that would create printed ‘green’ parts that would later be de-bound and sintered, leaving the ceramic additive in place.
Color Code: Natural
Diameter:
Reel Size:
Out Of Stock

CeramiX PEKK

Ceramic-filled PEKK and PEEK compounds have a long history in the plastics industry – especially in the semiconductor industry where these materials have been used to machine integrated circuit (IC) test sockets and fixtures. CeramiX™ PEKK contains 15% (wt %) of high purity Alumina (Al203) which creates a hard surface ideal for repeated uses in electronics assembly and fabrication facilities. Please Note: This material was NOT formulated for applications that would create printed ‘green’ parts that would later be de-bound and sintered, leaving the ceramic additive in place.

MADE IN THE USA

We manufacture all of our filaments in our 68,000 ft² manufacturing facility (located in Grand Rapids, Michigan) using state-of-the-art equipment and processes. Our goal continues to be to make the most innovative filaments on the market – targeting difficult end-use applications.

Print Recommendations

365-390°C
Extruder Temp
360-390°C
140-160°C
Bed Temp
120-140°C
Recommended
Heated Chamber
Recommended Up to 140°C if possible
0.4mm diameter minimum
Nozzle Specs
0.4mm diameter minimum
0.10mm or higher
Layer Height
0.25mm or higher
65°C for 4 hours
Drying Specs
120°C for 4+ hours as needed
RECOMMENDED

You May Also Like

Make confident choices and discover the best printing solutions.